Skip to product information
1 of 3

Stick-on ND filter for DJI Action 2

Stick-on ND filter for DJI Action 2

Regular price $9.99 USD
Regular price Sale price $9.99 USD
Sale Sold out
Shipping calculated at checkout.
Strength
Thanks for signing up for restock notifications!
There was an error signing up for restock notifications. Please try again.

Sign up to be notified when back in stock!

Notify Me

Next batch available approximately June 1.   Sign up to be notified of when stock is available.

Premium quality ND Filter for the DJI Action 2 camera   Available in ND4, 8, 16 and 32.  Also available in 3-piece multipacks: ND4, 8 and 16 or ND8, 16 and 32.  Producer pack (see below) is also available.

Before you buy, please read the compatibility note below.

Super high quality, stick-on neutral density filter for the DJI Action 2 camera made from top quality optical glass.  It uses a unique peel-and stick backing that you can remove and re-apply.. If the adhesive gets dirty, you can simply wash it with water to rejuvenate it!  The adhesive only covers the edges of the glass so it does not impede the crystal-clear quality.

Unlike other ND filters for the Action 2, these do not need a special bracket or mount, and do not use a magnetic attachment, so they say on!

High quality, 1mm thick hardened glass that is nano-coated for:

  • anti-scratch
  • repels water
  • repels fingerprints
  • anti-reflection

Whether you are using the ND filter for FPV drones, mountain biking footage or other action video, this will give you that smooth as silk, cinematic motion and reduce or eliminate jello.

ND transmission:

  • ND4 (ND 0.6) 25% transmission  (cloudy, overcast)
  • ND8 (ND 0.9) 12.5% transmission (some sunlight)
  • ND16 (ND 1.2) 6.25% transmission (bright sunlight)
  • ND32 (ND 1.5) 3.125% transmission (very bright sunlight

The Producer pack contains:

  • 1 x ND4
  • 2 x ND8
  • 2 x ND 16
  • 1 x ND32
  • 1 x Lens shield (for protection when not using a filter)
  • 3-Pack of replacement adhesives

Important compatibility notes:

If you use a TPU mount for your camera, ensure that the hole in the front is large enough to fit the filter (it must be at least 32mm).

Some TPU mounts that require the camera to be inserted from the side may not be compatible if they are not wide enough on the side to fit the camera and the filter (which sticks out another 1.5mm).

Most mounts from Brain3d are compatible, however if you are not sure, contact them to confirm.

View full details